Alamo 60C Operator's Manual del operador descargar pdf (Pagina 70)

OPERATION

BH20 Series 0413 Operation Section 4-24

OPERATION

Operating the mower with loose blade hardware will damage the blade holder or blades and

can result in blade breakage or blade fastener failure. Broken blades or bolts can be thrown

out from under the mower for distances up to 300 feet. When the blades are replaced, the

fastening hardware must be replaced. Check and retighten the blade hardware after the

first eight hours of operation. In severe cutting conditions, recheck the blade carrier and

blade bolt torque every 50 hours.

To help prevent structural damage caused by loose hardware, tighten gearbox mounting

hardware as specified. Check the fastener torque after first 8 hours of use and every 50

hours thereafter.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 137 138

Sin comentarios

Alamo 60C Operator's Manual del operador Pagina 70