Alamo 60C Operator's Manual del operador descargar pdf (Pagina 62)

OPERATION

BH20 Series 04/13 Operation Section 4-16

OPERATION

6. Hold driveline sections parallel to each other

and check for minimum 6” overlap. If driveline

has been marked for cutting, overlap will be the

distance between two marks. if driveline has

less than minimum overlap, do not use. Contact

authorized Bush Hog dealer.

NOTE: If driveline is the correct length, omit the

following steps 8 - 11 and proceed to step 12.

7. Clamp driveline in a well padded vice to prevent

damage to the shield. Cut off shield where

marked.

8. Using cut off section of shield as a guide, cut

shaft the same amount.

9. Repeat steps for other driveline section.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 137 138

Sin comentarios

Alamo 60C Operator's Manual del operador Pagina 62