Alamo 60C Operator's Manual del operador descargar pdf (Pagina 63)

OPERATION

BH20 Series 04/13 Operation Section 4-17

OPERATION

10. Deburr ends of driveline sections and clean

away all chips and filings.

11. Apply multi-purpose grease to inside of outer

driveline section. Assemble driveline and install

on tractor and cutter. Pull on each driveline

section to be sure yokes lock into place. Make

certain driveline shielding is in place and in

good condition.

12. Adjust lower lift arm(s) to level cutter right to

left. Refer to tractor operator’s manual for

instructions.

Before operating the Implement, check to make sure the Implement input driveline will not

bottom out or become disengaged. Bottoming out occurs when the inner shaft penetrates

the outer housing until the assembly becomes solid-it can shorten no more. Bottoming out

can cause serious damage to the Tractor PTO by pushing the PTO into the Tractor and

through the support bearings or downward onto the PTO shaft, breaking it off. A broken

driveline can cause personal injury.

(S3PT-18)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 137 138

Sin comentarios

Alamo 60C Operator's Manual del operador Pagina 63